Description
Burks 3CT5M-SS Stainless Steel Turbine Pump, 1/3 HP, 115/230V, 1 Phase
The Burks 3CT5M-SS stainless steel turbine pump is a
1/3 HP, single-phase CT Series close-coupled
regenerative turbine pump for 60 Hz operation. This model uses
a 115/230V ODP motor, stainless steel pump end construction,
1" NPT suction, 1" NPT discharge, and 3450 RPM operation.
The 3CT5M-SS is the stainless steel version of the CT5M pump configuration.
It is commonly selected where stainless wetted materials are required for the
application. Before ordering, confirm voltage, phase, connection size, fluid
temperature, material compatibility, suction conditions, and the required duty
point for your system. Browse other
Burks pumps
or view related
pump parts.
Key Features
- Burks CT Series close-coupled regenerative turbine pump
- Stainless steel pump end construction
- 1/3 HP, single-phase, 60 Hz motor
- 115/230V power requirement
- ODP open drip proof motor enclosure
- 316 stainless steel frame
- 303 stainless steel impeller and raceway
- 1" NPT suction and 1" NPT discharge connections
- Carbon / ceramic / stainless / Buna-N shaft seal
- Maximum operating temperature of 225°F with standard Buna-N seal
Performance Range
| Performance | Details |
|---|---|
| Approximate Capacity Range | 2.6–4.2 GPM |
| Heads To | 250 ft |
| Speed | 3450 RPM |
Connections
| Connection | Size |
|---|---|
| Suction | 1" NPT |
| Discharge | 1" NPT |
Specifications
| Specification | Details |
|---|---|
| Model | 3CT5M-SS |
| Horsepower | 1/3 HP |
| Voltage | 115/230V |
| Phase | Single Phase |
| Frequency | 60 Hz |
| Speed | 3450 RPM |
| Pump Type | Regenerative Turbine |
| Material | Stainless Steel |
| Frame Material | 316 Stainless Steel |
| Impeller Material | 303 Stainless Steel |
| Raceway Material | 303 Stainless Steel |
| Shaft Material | 316 Stainless Steel |
| Shaft Seal Material | Carbon / Ceramic / Stainless / Buna-N |
| Motor Enclosure | ODP – Open Drip Proof |
| Maximum Operating Temperature | 225°F with standard Buna-N seal |
Downloads & Technical References
Repair Parts & Service Support
For repair and service components, browse our
pump parts.
Confirm the exact pump model, voltage, and nameplate information before ordering
repair parts.
Installation & Selection Tips
Confirm your electrical supply matches the 115/230V single-phase
motor requirement. Verify that the system piping matches the
1" NPT suction and 1" NPT discharge
connections, and confirm that the required flow and head conditions fall within
the pump performance range.
For boiler feed, condensate return, circulation, transfer, chemical, or other
system applications, confirm flow rate, total dynamic head, fluid temperature,
inlet pressure, suction conditions, available NPSH, and stainless steel material
compatibility before ordering.
Frequently Asked Questions
What materials are used in the 3CT5M-SS pump end?
The 3CT5M-SS uses stainless steel pump end construction, including a 316 stainless
steel frame, 303 stainless steel impeller, and 303 stainless steel raceway.
What motor configuration does this pump use?
The Burks 3CT5M-SS uses a 1/3 HP, 115/230V, single-phase, 60 Hz ODP motor.
What are the connection sizes?
The suction connection is 1" NPT and the discharge connection is 1" NPT.
What performance range does this pump cover?
The current 3CT5M-SS product data lists an approximate capacity range of
2.6–4.2 GPM with head up to 250 ft.
Where can I find repair information?
Use the 3CT5M-SS exploded parts view linked above, or browse Rema LLC pump parts
for related service components.