Description
Burks 15CS5M Turbine Pump, 1.5 HP, 115/230V, 1 Phase
The Burks 15CS5M turbine pump is a 1.5 HP,
single-phase CS Series close-coupled regenerative turbine pump
for 60 Hz operation. This model uses a
115/230V ODP motor, bronze fitted construction,
1-1/4" NPT suction, 1" NPT discharge, and 3450 RPM operation.
Regenerative turbine pumps are commonly selected for applications that require
controlled flow at higher head conditions. Before ordering, confirm voltage,
phase, connection size, fluid temperature, suction conditions, and the required
duty point for your system. Browse other
Burks pumps
or view related
pump parts.
Key Features
- Burks CS Series close-coupled regenerative turbine pump
- 1.5 HP, single-phase, 60 Hz motor
- 115/230V power requirement
- ODP open drip proof motor enclosure
- Bronze fitted construction with cast iron frame
- Bronze impeller and bronze raceway
- 1-1/4" NPT suction and 1" NPT discharge connections
- Carbon / ceramic / stainless / Buna-N shaft seal
- Maximum operating temperature of 225°F with standard Buna-N seal
Performance Range
| Performance | Details |
|---|---|
| Approximate Capacity Range | 7.1–11 GPM |
| Approximate Head Range | 20–325 ft |
| Speed | 3450 RPM |
Connections
| Connection | Size |
|---|---|
| Suction | 1-1/4" NPT |
| Discharge | 1" NPT |
Specifications
| Specification | Details |
|---|---|
| Model | 15CS5M |
| Horsepower | 1.5 HP |
| Voltage | 115/230V |
| Phase | Single Phase |
| Frequency | 60 Hz |
| Speed | 3450 RPM |
| Material | Bronze Fitted |
| Frame Material | Cast Iron |
| Raceway Material | Bronze |
| Impeller Material | Bronze |
| Shaft Seal Material | Carbon / Ceramic / Stainless / Buna-N |
| Motor Enclosure | ODP – Open Drip Proof |
| Maximum Operating Temperature | 225°F with standard Buna-N seal |
Downloads & Technical References
Repair Parts & Service Support
For repair and service components, browse our
pump parts.
Confirm the exact pump model, voltage, and nameplate information before ordering
repair parts.
Installation & Selection Tips
Confirm your electrical supply matches the 115/230V single-phase
motor requirement. Verify that the system piping matches the
1-1/4" NPT suction and 1" NPT discharge
connections, and confirm that the required flow and head conditions fall within
the pump performance range.
For boiler feed, condensate return, circulation, transfer, or other system
applications, confirm flow rate, total dynamic head, fluid temperature,
inlet pressure, suction conditions, and available NPSH before ordering.
Frequently Asked Questions
What motor configuration does this pump use?
The Burks 15CS5M uses a 1.5 HP, 115/230V, single-phase, 60 Hz ODP motor.
What are the connection sizes?
The suction connection is 1-1/4" NPT and the discharge connection is 1" NPT.
What performance range does this pump cover?
The 15CS5M curve range shown in the Burks chart is approximately 7.1–11 GPM
across 20–325 ft of head.
What type of pump is the 15CS5M?
The 15CS5M is a Burks CS Series close-coupled regenerative turbine pump.
Where can I find manuals and repair information?
Use the CS Series spec sheet and exploded parts view linked above, or browse
Rema LLC pump parts for related service components.