Burks EC Series Pumps

Burks EC Series pumps are base-mounted regenerative turbine pumps designed for high-pressure, low-flow applications in commercial and industrial systems. These pumps are supplied without motors, allowing flexible motor selection for different installation requirements.

The regenerative turbine design uses a precision impeller and raceway to gradually increase pressure as liquid circulates through the pump. This design provides steady pressure and reliable fluid transfer in demanding systems.

Common Applications

  • Boiler feed systems
  • Condensate return systems
  • Pressure boosting
  • Heat transfer circulation
  • Industrial liquid transfer

Replacement Parts and Pump Service

Replacement components are available for these pumps. Many repairs can be completed using repair kits, which contain the internal components needed to rebuild the pump’s hydraulic section.

Burks Pumps |
Burks Repair Kits |
Pump Repair Parts |
Condensate Return Systems

Showing all 5 results

Sale!
Alt Text: Burks EC and ED series regenerative turbine pump used for boiler feed, condensate return, and high pressure low flow industrial pumping
Add to cart

Burks EC6M Base Mounted Turbine Pump End

Original price was: $5,352.00.Current price is: $3,746.00.

Burks EC6M EC Series base mounted regenerative turbine pump end.
This pump end uses bronze fitted construction, a bronze impeller with
Monel blades, 1-1/2" NPT suction, 1-1/4" NPT discharge, and a
carbon / ceramic / stainless / Buna-N mechanical seal.

Approximate curve range is 8–14 GPM with head from about 60–340 ft.
This is a pump end only and does not include a motor, coupling, base,
or coupling guard unless quoted separately.

Sale!
Alt Text: Burks EC and ED series regenerative turbine pump used for boiler feed, condensate return, and high pressure low flow industrial pumping
Add to cart

Burks EC7M Base Mounted Turbine Pump End

Original price was: $5,352.00.Current price is: $3,373.00.

Burks EC7M EC Series base mounted regenerative turbine pump end.
This pump end uses bronze fitted construction, a bronze impeller with
Monel blades, 1-1/2" NPT suction, 1-1/4" NPT discharge, and a
carbon / ceramic / stainless / Buna-N mechanical seal.

Approximate curve range is 11–20 GPM with head from about 40–340 ft.
This is a pump end only and does not include a motor, coupling, base,
or coupling guard unless quoted separately.

Sale!
Alt Text: Burks EC and ED series regenerative turbine pump used for boiler feed, condensate return, and high pressure low flow industrial pumping
Add to cart

Burks EC8M Base Mounted Turbine Pump End

Original price was: $5,392.00.Current price is: $3,505.00.

Burks EC8M EC Series base mounted regenerative turbine pump end.
This pump end uses bronze fitted construction, a bronze impeller with
Monel blades, 1-1/2" NPT suction, 1-1/4" NPT discharge, and a
carbon / ceramic / stainless / Buna-N mechanical seal.

Approximate curve range is 10–25 GPM with head from about 20–380 ft.
This is a pump end only and does not include a motor, coupling, base,
or coupling guard unless quoted separately.

Sale!
Alt Text: Burks EC and ED series regenerative turbine pump used for boiler feed, condensate return, and high pressure low flow industrial pumping
Add to cart

Burks EC9M Base Mounted Turbine Pump End

Original price was: $5,602.00.Current price is: $3,641.00.

Burks EC9M EC Series base mounted regenerative turbine pump end.
This pump end uses bronze fitted construction, a bronze impeller with
Monel blades, 1-1/2" NPT suction, 1-1/4" NPT discharge, and a
carbon / ceramic / stainless / Buna-N mechanical seal.

Approximate curve range is 12–29 GPM with head from about 20–360 ft.
This is a pump end only and does not include a motor, coupling, base,
or coupling guard unless quoted separately.

Sale!
Alt Text: Burks EC and ED series regenerative turbine pump used for boiler feed, condensate return, and high pressure low flow industrial pumping
Add to cart

Burks EC10M Base Mounted Turbine Pump End

Original price was: $5,602.00.Current price is: $3,362.00.

Burks EC10M EC Series base mounted regenerative turbine pump end.
This pump end uses bronze fitted construction, a bronze impeller with
Monel blades, 1-1/2" NPT suction, 1-1/4" NPT discharge, and a
carbon / ceramic / stainless / Buna-N mechanical seal.

Approximate curve range is 14–35 GPM with head from about 20–380 ft.
This is a pump end only and does not include a motor, coupling, base,
or coupling guard unless quoted separately.