• Alt Text: Burks EC and ED series regenerative turbine pump used for boiler feed, condensate return, and high pressure low flow industrial pumping

Burks EC10M Base Mounted Turbine Pump End

Burks EC10M EC Series base mounted regenerative turbine pump end.
This pump end uses bronze fitted construction, a bronze impeller with
Monel blades, 1-1/2" NPT suction, 1-1/4" NPT discharge, and a
carbon / ceramic / stainless / Buna-N mechanical seal.

Approximate curve range is 14–35 GPM with head from about 20–380 ft.
This is a pump end only and does not include a motor, coupling, base,
or coupling guard unless quoted separately.

Original price was: $5,602.00.Current price is: $3,362.00.

Item: EC10M
EXPLODED PARTS DIAGRAM
Spec Sheet
Burks Warranty

Quantity

✓ Available to order.
Typical shipment is 1–3 business days when available from factory stock. Inventory changes daily.

Just need a quote?
Contact Rema for a written quote or price review before ordering this Burks pump.
Need help matching this pump?
Send a pump tag photo before ordering.

Description

Burks EC10M Base Mounted Turbine Pump End

The Burks EC10M base mounted turbine pump is part of the
Burks EC Series of base mounted regenerative turbine pumps. This listing
is for the EC10M pump end only.

The EC10M is designed for low-flow, high-head applications using clean,
non-corrosive, non-abrasive, lower-viscosity liquids. Typical applications
may include boiler feed, condensate return, heat transfer, hot and cold water
circulation, pressure boosting, high pressure spray, and similar services
when the pump curve and system conditions are properly verified.

This pump end uses bronze fitted construction, a bronze impeller with Monel
blades, 1-1/2" NPT suction, 1-1/4" NPT discharge, and a
carbon / ceramic / stainless / Buna-N mechanical shaft seal. Browse other
Burks pumps
or view related
pump parts.

Important Ordering Note

This EC10M listing is for the pump end only. Motor, coupling,
base, coupling guard, and assembled base-mounted pump package components
are not included unless quoted separately. Confirm the required motor
horsepower, voltage, phase, enclosure, coupling, base, and guard before
ordering a complete pump assembly.

Key Features

  • Burks EC Series base mounted regenerative turbine pump
  • EC10M pump end only
  • Bronze fitted construction
  • Cast iron casing and power frame
  • Bronze impeller with Monel blades
  • Bronze raceway
  • No. 303 stainless steel shaft
  • Carbon / ceramic / stainless / Buna-N mechanical shaft seal
  • 1-1/2" NPT suction connection
  • 1-1/4" NPT discharge connection
  • Factory tested pump design
  • Self-priming after casing is filled with liquid

Performance Range

Performance Details
Approximate Capacity Range 14–35 GPM
Approximate Head Range 20–380 ft
Pump Type Regenerative Turbine

Connections

Connection Size
Suction 1-1/2" NPT
Discharge 1-1/4" NPT

Specifications

Specification Details
Model EC10M
Series Burks EC Series
Configuration Base Mounted Pump End Only
Pump Type Regenerative Turbine
Construction Bronze Fitted
Power Frame Material Cast Iron
Casing Material Cast Iron
Impeller Material Bronze with Monel Blades
Raceway Material Bronze
Shaft Material No. 303 Stainless Steel
Shaft Seal Material Carbon / Ceramic / Stainless / Buna-N
Maximum Operating Temperature 225°F with standard Buna-N seal
Maximum Casing Working Pressure 200 PSI
Maximum Inlet Pressure 50 PSI

Downloads & Technical References

Repair Parts & Service Support

For repair and service components, browse our
pump parts.
Confirm the exact pump model, seal material, construction, and nameplate
information before ordering repair parts.

Installation & Selection Tips

Confirm that the required duty point falls within the approximate
14–35 GPM and 20–380 ft head performance
range. Verify suction conditions, inlet pressure, fluid temperature, viscosity,
material compatibility, and available NPSH before ordering.

A suction strainer is recommended to help prevent chips, scale, and hard foreign
particles from entering the pump and damaging the raceway or impeller. For boiler
feed, condensate return, heat transfer, pressure boosting, high pressure spray,
or circulation service, confirm the full system requirements before selection.

Frequently Asked Questions

Is the EC10M a complete pump with motor?

This listing is for the EC10M pump end only. Motor, coupling, base, coupling
guard, and complete base-mounted assembly components are not included unless
quoted separately.

What are the connection sizes?

The EC10M has a 1-1/2" NPT suction connection and a 1-1/4" NPT discharge
connection.

What performance range does this pump cover?

The approximate EC10M curve range is 14–35 GPM with head from about 20–380 ft.
Final selection should be checked against the individual pump curve.

What materials are used in the EC10M?

The EC10M uses bronze fitted construction with cast iron casing and power frame,
bronze impeller with Monel blades, bronze raceway, No. 303 stainless steel shaft,
and a carbon / ceramic / stainless / Buna-N mechanical seal.

Can this be used for boiler feed or condensate return?

Yes, the EC Series may be used for boiler feed or condensate return service
when the required flow, head, temperature, pressure, suction conditions, and
material compatibility are within the pump limits.