Need help selecting a unit?
Description
AirFlow 65 Gallon Simplex Condensate Unit
The AirFlow 65 Gallon Simplex Condensate Unit is a
single-pump condensate recovery package designed for commercial HVAC,
boiler-room, and industrial steam applications requiring a larger
condensate receiver.
The 65 gallon simplex series is available with pump selections from
1/2 HP through 2 HP. Pump selection should be based on the required
condensate flow and discharge pressure or total dynamic head rather
than horsepower alone.
Available 65 Gallon Simplex Models
| Model | Motor | Pump Performance | Discharge | Receiver |
|---|---|---|---|---|
| AFP-65S-C | 1/2 HP |
35 GPM @ 10 PSI 28 GPM @ 20 PSI 15 GPM @ 30 PSI |
1″ | 65 gal |
| AFP-65S-D | 3/4 HP |
54 GPM @ 10 PSI 36 GPM @ 20 PSI 27 GPM @ 30 PSI 10 GPM @ 40 PSI |
1″ | 65 gal |
| AFP-65S-E | 1 HP |
58 GPM @ 10 PSI 50 GPM @ 20 PSI 40 GPM @ 30 PSI 25 GPM @ 40 PSI |
1″ | 65 gal |
| AFP-65S-F | 1-1/2 HP |
69 GPM @ 10 PSI 62 GPM @ 20 PSI 50 GPM @ 30 PSI 35 GPM @ 40 PSI |
1″ | 65 gal |
| AFP-65S-G | 2 HP |
82 GPM @ 10 PSI 75 GPM @ 20 PSI 64 GPM @ 30 PSI 39 GPM @ 40 PSI |
1-1/2″ | 65 gal |
65 Gallon Receiver Information
- Receiver capacity: 65 gallons
- Configuration: Simplex / single pump
- Receiver dimensions: approximately 26″ × 24″ × 24″
- Overall dimension with pump: approximately 37″
- Condensate return connection: 3″
- Pump discharge: 1″ on C through F; 1-1/2″ on G
- Electrical options: single-phase and three-phase configurations
Refer to the AirFlow dimensional drawing for complete connection locations,
receiver dimensions, and installation clearances before ordering or laying
out piping.
Selecting the Correct Pump
Choose the pump model based on required condensate flow and discharge
pressure or total dynamic head. If these values are not known, contact
Rema before ordering for assistance selecting the correct model.
Select the required motor voltage and phase when ordering.
Three-phase units require an existing motor starter or control panel
at the installation.
Optional Accessories & Upgrades
- Stainless steel receiver upgrade
- Multi-stage high-pressure pumps
- TEFC or explosion-proof motors
- Simplex or duplex control panel
- NEMA 4, 4X or explosion-proof rated panels
- Isolation valves situated between the pump and receiver
- Thermometer
Contact Rema for accessory pricing and to confirm compatibility with the
selected unit.
Typical Applications
- Commercial HVAC and steam heating systems
- Boiler rooms
- Schools, hospitals, apartments, and institutional facilities
- Commercial laundries and dry cleaning plants
- Steam coils and heat exchangers
- Industrial and process-steam applications
Technical Resources
Use the product buttons above to view the dimensional drawing, pump
performance curve, and AirFlow owner’s manual.
Related AirFlow Condensate Equipment
-
Shop all Simplex Condensate Units
-
View Duplex Condensate Units
for applications requiring two pumps and alternating operation. -
AirFlow Condensate Units Shop
-
AirFlow Condensate Recovery Units — Sizing & Technical Information
Need help selecting a unit?
Send Rema your boiler size or condensate load, required GPM, discharge
pressure or TDH, voltage, and phase. We can help confirm the appropriate
AirFlow model before ordering.
Contact Rema for sizing help.