BD-16 Blow-Off Separator Tank

Original price was: $4,392.00.Current price is: $2,766.00.

Quantity

Select the pump model and electrical configuration below before ordering.

3-Phase Note: Three-phase units require an existing motor starter or control panel at the installation.

✓ Available to order.
AirFlow condensate units typically have a 1 week lead time. Lead time may vary based on receiver size, pump configuration, electrical requirements, optional accessories, and current factory workload.

 

Need a written quote?
Contact Rema for pricing, lead time, freight, or help selecting the correct AirFlow condensate unit for your application.

 

Need help selecting a unit? Send your boiler size or condensate load, required GPM, discharge pressure or TDH, voltage, and phase before ordering.

Description

BD-16 Non-Code Blow-Off Separator Tank

The Rema BD-16 non-code blow-off separator tank is designed for boiler blowdown applications from 15 to 30 HP where a non-ASME tank is permitted. This mid-size separator helps cool and separate high-temperature boiler discharge before it reaches the drain.

Built from heavy-gauge steel, the BD-16 offers increased capacity and connection sizes for larger boiler systems while maintaining a compact, maintenance-free separator design.

Why Choose the BD-16

  • Designed for boilers from 15 to 30 HP
  • 16" diameter for increased capacity
  • 11-3/4 gallon capacity
  • 1-1/4" blow-off inlet
  • Heavy-gauge steel construction
  • Simple, maintenance-free separator design
  • Commonly used alongside condensate return systems in boiler room projects

Quick Specs

Model BD-16
Boiler HP Range 15 to 30 HP
Capacity 11-3/4 Gallons
Diameter 16"
Overall Height 32"
Blow-Off Inlet 1-1/4"
Max Boiler Pressure 200 PSI

BD-16 Blow-Off Separator Tank Specifications

Specification BD-16
Overall Height 32"
Diameter 16"
Tank Height 20"
Vent 2-1/2"
Drain 1/2"
Water Inlet 1/2"
Outlet 3"
Blow-Off Inlet 1-1/4"
Thermometer 1/2"
Inlet Height 15-1/4"
Boiler HP Range 15 to 30 HP
Max Boiler Pressure 200 PSI
Capacity 11-3/4 Gallons

Typical Application

The BD-16 is intended for mid-size boiler blowdown installations where additional separator capacity is needed. It helps receive hot blowdown discharge, vent flash steam, and direct cooled water toward the drain connection in applications where a non-code blow-off separator is acceptable.

Important Before Ordering

This is a non-ASME, non-code blow-off separator tank.

The buyer, contractor, engineer, or end user must verify that a non-code tank is acceptable for the installation and permitted by local code, state boiler regulations, the authority having jurisdiction, and the owner’s insurance requirements.

Other Blow-Off Separator Sizes

Frequently Asked Questions

What boiler size is the BD-16 designed for?

The BD-16 is designed for boiler blowdown applications from 15 to 30 HP.

Is the BD-16 an ASME code tank?

No. The BD-16 is a non-ASME, non-code blow-off separator tank. The buyer must confirm that a non-code tank is acceptable for the installation.

What is the BD-16 tank capacity?

The BD-16 has a capacity of approximately 11-3/4 gallons.

What is the blow-off inlet size?

The BD-16 includes a 1-1/4" blow-off inlet.

Are blow-off separator tanks commonly used with condensate return systems?

Yes. Blow-off separator tanks and condensate return systems are commonly purchased for the same boiler room projects when blowdown handling and condensate recovery equipment are being updated together.

What is the maximum boiler pressure rating?

The BD-16 is listed for applications up to 200 PSI maximum boiler pressure.